Mould resins.
Resins designed for mould production are easily applied, ready-to-use solutions. They are ideal for the rapid creation of high quality moulds and thus for reducing the production times of the end product. These resins are both efficient and practical, fundamental factors in a sector with very high daily outputs.
Articles
| PRODUCT | Application | Chemical Type | Viscosity | Gel Time | Exothermic Peak | HDT | Barcol | Minimum order |
|---|---|---|---|---|---|---|---|---|
| R918A0000G40 Filled resin, highly compatible with glass fibre. Enables wet-on-wet application of up to 20 coats | S, HLU | - | 900-1100 | 32-42 | - | 83 | 45 | - |
| R933A Filled resin, highly compatible with glass fibre. Enables wet-on-wet application of up to 20 coats | S, HLU | - | 1400-1600 | 25-40 | - | 80 | 45 | - |
Legenda
Applications
| Cod. | Description |
|---|---|
| S | Spray |
| R | Roller |
| H | Brush |
| HLU | Manual lamination |
| I | Infusion |
| RTM | RTM |
| C | Casting |
| VB | Bag |
| HP | Hot Plate |
| PU | Pultrusion |
| FW | Filament winding |
| T | Hopper |
Version
| Dimension | Description |
|---|---|
| E | Low emissions |
| P | Pigmented |
| B | Without catalysis indicator |
| L | Low exothermic peak |
| R | Low viscosity |
| Z | Low styrene content |
| S | UV stabilised |
| F | Flexibilised |
| V | High viscosity |
| X | Special additive |
Chemical Nature
| Cod. | Description |
|---|---|
| O | Orthoftalic |
| D | DCPD |
| I | Isophtalic |
| IN | Iso-Npg |
| IO | Iso-Ortho |
| OD | Ortho-DCPD |
| VE | Vinylester |
Measure Unit
| Dimension | Description |
|---|---|
| Viscosity | mPas |
| Gel time | minutes |
| Exothermic Peak | °C |
| Styrene Content | % |
| HDT | °C |