Special gelcoats.
Gelcoats formulated for various production sectors, specifically:
- Designed for lamination with epoxy resins, with good adhesion
- Designed for direct use on polystyrene, for indoor use only
- Designed for model production, standard type, colour grey
- Designed for the production of models where an extremely smooth final surface is required
Articles
| PRODUCT | Use | Chemical Type | Version | Viscosity | Gel Time | Exothermic Peak | Styrene Content | HDT | Barcol | Minimum order |
|---|---|---|---|---|---|---|---|---|---|---|
| H15E Thixotropic gelcoat with good adhesion on epoxy resins | - | - | S, R, P | 500-14000 | 7-17 | - | - | - | 45 | 100 |
| HPPS7040S Thixotropic primer intended for painting with very low polystyrene aggression. Only available in grey | - | - | S, P | 6000-7000 | 7-17 | - | - | - | - | 25 |
| HPFM7040S Polishable thixotropic topcoat with very low polystyrene aggression. Only available in grey | - | - | - | 6000-7000 | 7-17 | - | - | - | - | 25 |
| HTFM7037 High gloss thixotropic gelcoat for model production | - | - | S | 2000-2500 | 7-17 | - | - | - | 45 | 25 |
| M08S53G15 Easy-application thixotropic gelcoat enabling complete elimination of the appearance defects caused by use of MAT in the skincoat | - | - | S | 2400-3600 | 12-20 | - | - | - | 55 | 25 |
Legenda
Applications
| Cod. | Description |
|---|---|
| S | Spray |
| P | Brush |
| R | Roller |
Measure Unit
| Dimension | Description |
|---|---|
| Viscosity | mPas |
| Gel time | minutes |
| Exothermic Peak | °C |
| Styrene Content | % |
| HDT | °C |
Version
| Cod. | Description |
|---|---|
| A | With Mould releaser |
| P | Topcoat |
| Z | Standard |
| S | Without fiber |
| C | Chopped strand |
| M | Milled fiber |
Chemical Nature
| Cod. | Description |
|---|---|
| O | Orthoftalic |
| D | DCPD |
| I | Isophtalic |
| IN | Iso – Npg |
| IO | Iso – Ortho |
| OD | Ortho – DCPD |
| VE | Vinylester |